Simplicity 2691522-01 Legacy XL Parts Manual
![Simplicity 2691522-01 Legacy XL Tractor manual cover](/images/OPkbDtpDgyNeAbcECSiFDfXh/thumbs/thumb175x175.webp)
To perform an oil change, first, ensure the tractor is on a level surface and the engine is off. Remove the oil drain plug and allow the old oil to fully drain. Replace the drain plug and refill with the recommended oil type, checking the level with the dipstick.
Check the battery connections for corrosion and ensure they are tight. Verify the fuel level and that the fuel valve is open. If the problem persists, inspect the spark plug and replace it if necessary.
Regularly clean the underside of the mower deck to prevent grass buildup. Sharpen the blades at least once per mowing season, and check the belt tension to ensure proper operation.
The recommended tire pressure is typically 10-14 psi for the front tires and 6-10 psi for the rear tires. Always check the tire sidewall or owner's manual for specific recommendations.
Ensure the mower deck is level by adjusting the deck leveling bolts. Check for worn or damaged blades and replace them if necessary. Also, verify that the tire pressures are equal on both sides.
To winterize, clean the tractor thoroughly and apply a coat of wax to protect the finish. Drain the fuel or add a stabilizer, change the oil, and disconnect the battery. Store in a dry, protected area.
Use tire chains or wheel weights to increase traction. Ensure that the tires are properly inflated and consider using a lower gear to maintain control.
First, check the PTO switch for proper operation. Inspect the PTO clutch and wiring connections for any damage or loose connections. Replace any faulty components.
The air filter should be checked after every 25 hours of use and replaced if dirty or damaged. Regular replacement ensures optimal engine performance and longevity.
Check the transmission fluid level regularly and change it as per the manufacturer's recommendation, usually after 100 hours of operation. Inspect for leaks and ensure the cooling fins are clean.