Simplicity 2691456-03 Regent Parts Manual
![Simplicity 2691456-03 Regent Tractor manual cover](/images/VxBskictZQLOliuzqeSumOXS/thumbs/thumb175x175.webp)
To start the tractor, ensure the parking brake is engaged, the PTO is disengaged, and the throttle is set to halfway. Turn the ignition key to the start position until the engine starts, then release the key.
Check the fuel level, ensure the battery is charged, and inspect the spark plug for dirt or wear. Verify that the safety switches are properly engaged.
Regular maintenance includes checking and changing the oil, replacing the air filter, sharpening the blades, and inspecting the belts for wear. Refer to the owner's manual for detailed schedules and procedures.
Ensure the mower deck is level, the blades are sharp, and tire pressure is even. If the problem persists, check for bent blades or obstructions in the deck.
The recommended oil type is SAE 30 for temperatures above 32°F (0°C) and 10W-30 for varying temperature conditions. Always check the owner's manual for the most accurate information.
To change the blades, first disconnect the spark plug. Then, raise the mower deck and use a wrench to remove the blade bolt. Replace the blade and secure it with the bolt before lowering the deck and reconnecting the spark plug.
Excessive vibration may be caused by unbalanced or damaged blades, loose mounting bolts, or debris lodged in the mower deck. Inspect and address these areas to resolve the issue.
To adjust the mower deck, park the tractor on a level surface and lower the deck. Use the adjustment levers to raise or lower the deck as needed for an even cut. Refer to the manual for specific adjustment points.
Inspect the engine for any visible leaks, check the oil filter and drain plug for tightness, and ensure the oil is not overfilled. If leaks persist, consult a professional technician.
Clean the tractor thoroughly, change the oil, and add a fuel stabilizer to the tank. Store it in a dry, covered area, and disconnect the battery to prevent discharge.