Simplicity 2691418-00 Prestige Parts Manual
![Simplicity 2691418-00 Prestige Tractor manual cover](/images/VXtVCbgWnTfFbtyFsXdTWalg/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine, and place an oil collection pan under the drain plug. Remove the drain plug and allow the oil to completely drain. Replace the drain plug, remove the oil filter, and install a new one. Refill the engine with the recommended type and amount of oil.
Check if the battery is charged and the connections are clean and tight. Ensure the fuel valve is open and there is enough fuel in the tank. Inspect the spark plugs for wear and replace if necessary. Make sure the safety switches are engaged properly.
Regularly clean the mower deck to prevent grass buildup. Sharpen the blades as needed and check for any damage. Ensure the deck is properly aligned and leveled. Lubricate the spindles and other moving parts according to the maintenance schedule.
Refer to the operator's manual for the recommended tire pressure, which is typically between 10 to 14 psi for the rear tires and 12 to 16 psi for the front tires. Ensure the tires are inflated to the correct pressure for optimal performance and safety.
First, check that the mower deck is level. Inspect the blades for sharpness and damage. Ensure the tire pressure is correct and consistent. Examine the ground speed; cutting too fast may cause uneven results.
Clean the tractor thoroughly and remove any debris. Change the oil and filter, and add fuel stabilizer to the gas tank. Disconnect the battery and store it in a cool, dry place. Inflate the tires to the recommended pressure and cover the tractor to protect it from the elements.
Locate the throttle control cable and adjust the tension by loosening the clamp screw. Slide the cable to increase or decrease tension as needed, then tighten the clamp screw. Ensure the throttle moves smoothly through its range.
Stop the tractor immediately and allow the engine to cool. Check the coolant level and add coolant if necessary. Inspect the radiator for obstructions and clear any debris. Ensure the fan and belts are in good condition and replace them if needed.
Disconnect the spark plug wire for safety. Remove the mower deck according to the manual instructions. Release the belt tension and remove the old belt. Install the new belt following the diagram in the manual, ensuring it is properly seated on all pulleys. Reinstall the mower deck.
Regular maintenance includes checking the oil and changing it as needed, inspecting and replacing the air filter, checking the spark plugs, lubricating moving parts, and ensuring the tires are properly inflated. Follow the maintenance schedule in your manual for detailed guidance.