Simplicity 2691415-01 Legacy XL Parts Manual
![Simplicity 2691415-01 Legacy XL Tractor manual cover](/images/kkVNHByrEAURxCjbTweRSexi/thumbs/thumb175x175.webp)
To change the engine oil, first warm up the engine, then turn it off and remove the key. Place a drain pan under the engine, remove the oil drain plug, and let the oil drain completely. Replace the drain plug, then refill with the recommended oil type and quantity.
If your tractor won't start, check the battery connections for corrosion and ensure they are tight. Verify the fuel level and ensure the fuel valve is open. Check the spark plug for wear or damage, and replace it if necessary.
First, ensure the blades are sharp and not damaged. Check the deck level to make sure it is even. Inspect the belt for wear or damage and replace it if necessary. Also, ensure the tire pressure is correct to maintain an even cut.
Regular maintenance includes checking the oil level before each use, changing the oil every 50 hours, cleaning the air filter every 25 hours, and replacing it every 100 hours. Regularly inspect belts, blades, and tires for wear and tear.
To adjust the mower deck height, locate the deck lift lever on the tractor. Move the lever to the desired position to set the cutting height. Check the owner's manual for recommended height settings for different types of grass.
Excessive vibration can be caused by unbalanced blades or debris stuck in the mower deck. Check the blades for damage and ensure they are balanced. Clean any debris from the mower deck to prevent vibration.
To replace the drive belt, remove the mower deck and locate the drive belt. Note the belt routing before removal. Release the belt tension and remove the old belt. Install the new belt following the routing diagram and re-tension the belt.
Check the transmission fluid level and add fluid if necessary. Inspect the drive belt for wear or damage and replace it if needed. Ensure all linkages are properly adjusted and not worn out.
Clean the tractor thoroughly and remove any grass or debris. Change the engine oil and fill the fuel tank, adding a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
The recommended tire pressure for this tractor is usually around 10-14 PSI for the rear tires and 14-20 PSI for the front tires. Refer to the user manual for exact specifications based on your specific model and usage conditions.