Simplicity 2691367-00 Regent Parts Manual
![Simplicity 2691367-00 Regent Tractor manual cover](/images/FLADeDEvdZjZVeWwufEvBBnW/thumbs/thumb175x175.webp)
Ensure the parking brake is engaged, the PTO switch is off, and the transmission is in neutral. Insert the key and turn it to the start position until the engine runs.
Use SAE 30 oil above 32°F and SAE 10W-30 below 32°F. Always check the owner's manual for specific recommendations.
Check the battery connections, ensure fuel level is adequate, inspect the spark plug, and verify that the safety switches are not engaged.
Regularly change the oil, replace the air filter, clean the mower deck, inspect belts and blades, and check tire pressure.
Use the height adjustment lever located near the driver's seat. Move the lever to the desired cutting height position.
Ensure the PTO switch is on, check the belt for wear or damage, and inspect the PTO clutch for proper operation.
Drain the fuel or add a fuel stabilizer, change the oil, clean the mower deck, remove the battery, and store in a dry place.
Sharpen the blades at the start of each mowing season and as needed during the season for optimal performance.
Refer to the tire sidewall for manufacturer specifications, but generally, front tires should be 14 psi and rear tires 10 psi.
Disconnect the battery, remove the mower deck, release the tension on the old belt, remove it, and install the new belt following the belt routing diagram.