Simplicity 2691335-00 Broadmoor Parts Manual
![Simplicity 2691335-00 Broadmoor Tractor manual cover](/images/jjZSuxBfKccvohZRxYVtaEpv/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Shut off the engine and remove the key. Place an oil pan under the drain plug, remove the plug, and let the oil drain completely. Replace the plug, remove the oil filter, and install a new one. Fill with new oil as per the specifications in the manual.
Check the battery connections to ensure they are clean and tight. Verify that the fuel tank has sufficient gasoline. Inspect the spark plug for fouling and replace if necessary. Ensure that the safety features, such as the seat switch and brake pedal, are engaged.
Check the tire pressure to ensure all are at recommended levels. Inspect the mower deck for any obstructions or damage. Adjust the deck leveling as described in the manual to ensure an even cut. Sharpen or replace the mower blades if they are dull or damaged.
The air filter should be checked every 25 hours of operation and replaced if dirty or damaged. Regular replacement ensures optimal engine performance and longevity.
Regularly clean the battery terminals and ensure they are tight. Check the battery charge monthly and keep it fully charged. Store the tractor in a dry, cool place when not in use for extended periods. Consider using a battery maintainer during off-seasons.
Clean the tractor thoroughly, change the oil, and ensure the fuel system is treated with a stabilizer. Remove the battery and store it in a warm place. Cover the tractor to protect it from dust and moisture.
Locate the cutting height adjustment lever, usually found on the fender. Move the lever to the desired position, ensuring the deck is level and the blades are not touching the ground.
Excessive vibration can be caused by unbalanced blades or debris buildup. Inspect the blades for damage and balance them if necessary. Clean any debris from the mower deck and ensure all bolts and nuts are tightened securely.
Ensure the tires are properly inflated and consider using tire chains for better traction. Weight can be added to the rear of the tractor to improve stability on slopes. Always operate slowly and follow the guidelines in the manual for slope operation.
First, disconnect the spark plug wire. Remove the mower deck following the instructions in the manual. Release the tension on the drive belt tensioner and remove the old belt. Install the new belt, ensuring it is seated correctly on all pulleys, and re-tension the belt. Reattach the mower deck.