Simplicity 2691333-02 Regent S Parts Manual
![Simplicity 2691333-02 Regent S Tractor manual cover](/images/UQDJXVcZkgsMnBiZZyWTQuUH/thumbs/thumb175x175.webp)
To perform routine maintenance, regularly check and change the oil, replace the air filter, inspect the spark plugs, and ensure that all belts and blades are in good condition. Refer to the owner's manual for specific intervals and detailed instructions.
If the tractor won't start, check the battery connections and charge the battery if necessary. Ensure that the fuel tank has gasoline and that the fuel shut-off valve is open. Also, inspect the spark plug for wear or damage.
Uneven cutting may be due to an unlevel mower deck. Check and adjust the deck level according to the manual's instructions. Also, ensure that the blades are sharp and not worn out.
The recommended tire pressure for the Simplicity 2691333-02 Regent S Tractor is typically found in the operator's manual. Ensure all tires are inflated to the specified PSI for optimal performance.
To change the oil, warm up the engine, then turn it off. Place an oil pan under the plug, remove it, and let the old oil drain. Replace the plug and add new oil as per the specifications in the manual.
If the blades don't engage, check the PTO (Power Take-Off) switch and ensure it is in the 'on' position. Inspect the drive belts for wear or damage and replace them if necessary.
For off-season storage, clean the tractor thoroughly, change the oil, and drain the fuel or add a fuel stabilizer. Store it in a dry place, and disconnect the battery to prevent discharge.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends higher than 10% as they can damage the engine.
The air filter should be checked before each use and replaced if it shows signs of clogging or damage. Generally, replacing it annually or after 100 hours of use is recommended.
If the tractor is overheating, check the engine coolant level and refill if necessary. Ensure the radiator and cooling fins are clean and free from debris. Inspect for any leaks in the cooling system.