Simplicity 2691333-00 Regent S Parts Manual
![Simplicity 2691333-00 Regent S Tractor manual cover](/images/NTPBvlFoIDepkamerkvPJcmA/thumbs/thumb175x175.webp)
To start the Simplicity 2691333-00 Regent S Tractor, ensure the parking brake is engaged, the PTO is disengaged, and the transmission is in neutral. Then, turn the ignition key to the start position and release it once the engine starts.
Use unleaded gasoline with an octane rating of at least 87. Avoid using ethanol blends higher than 10%.
Change the oil every 50 hours of operation or at the start of each mowing season, whichever comes first.
The recommended tire pressure is usually around 10-14 psi for the front tires and 6-10 psi for the rear tires. Refer to the owner's manual for exact specifications.
Check if the PTO switch is operational, ensure all safety features are engaged, and inspect the mower deck belt for damage or misalignment.
Clean the tractor, change the oil, stabilize the fuel, remove the battery, and keep it in a dry, covered area. Lubricate moving parts to prevent rust.
Sharpen or replace the mower blades, adjust the deck level, and ensure the engine is running at full throttle for optimal performance.
Check the spark plug for wear, ensure the air filter is clean, and verify the fuel is fresh. Consider having the carburetor inspected if the problem persists.
First, disengage the PTO and remove the mower deck. Then, release the tension on the belt tensioner, remove the old belt, and install the new belt following the same path.
Always wear appropriate protective gear, keep bystanders away, avoid mowing on steep slopes, and never bypass safety features.