Simplicity 2691278-01 Regent Parts Manual

To start the tractor, ensure the parking brake is engaged, the PTO is turned off, and the transmission is in neutral. Insert the key into the ignition and turn it to the start position. Release the key once the engine starts.
Check if the battery is charged and the connections are clean and tight. Ensure the fuel tank has sufficient fuel. Verify that the spark plug is clean and properly gapped. If the problem persists, consult the user manual or contact a professional technician.
Change the oil after the first 5 hours of use, and then every 50 hours of operation or annually, whichever comes first. Always refer to the operator's manual for specific oil type and capacity.
Front tires should be inflated to 14 psi, and rear tires to 10 psi. Always check the tire pressure when the tires are cold for an accurate reading.
To engage the mower deck, first ensure the engine is running and the throttle is set to the fast position. Pull up on the PTO switch to engage the blades. Always engage the mower deck while the tractor is on a flat surface.
Check the oil and change if necessary, inspect and clean the air filter, sharpen or replace the mower blades, check tire pressure, and lubricate all moving parts. Additionally, check the battery and charge if needed.
Ensure the mower deck is level and not clogged with grass clippings. Check the blades for sharpness and balance. Inspect tire pressure for consistency across all tires. If issues persist, consult the manual for further adjustments.
Stop the tractor immediately and allow it to cool. Check the coolant levels and inspect the radiator for blockages. Ensure the fan is operational. If the problem continues, consult a professional for a thorough inspection.
Clean the tractor thoroughly, change the oil, and add a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture. Store it in a dry, sheltered location.
Stop the tractor and disengage the PTO. Locate the cutting height adjustment lever on the tractor's fender. Move the lever to the desired cutting height position, ensuring the deck is level.