Simplicity 2691180-00 Conquest Parts Manual
![Simplicity 2691180-00 Conquest Tractor manual cover](/images/kHFmYVdkbjhwhsZHIAjtUwya/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface and the engine is off. Remove the oil drain plug and allow the oil to completely drain into a pan. Replace the drain plug and add new oil as specified in the manual. Check the oil level with the dipstick.
The Simplicity 2691180-00 Conquest Tractor is designed to run on unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content.
If the tractor won't start, check the battery connections and ensure they are clean and tight. Verify that the fuel tank has fuel and the fuel valve is open. Check the spark plug for wear and replace if necessary.
Regular maintenance includes checking and changing the oil, replacing the air filter, inspecting the spark plug, checking tire pressure, and lubricating moving parts. Refer to the owner's manual for a detailed maintenance schedule.
To adjust the cutting height, locate the height adjustment lever, typically found near the driver's seat. Move the lever to the desired cutting height position. Ensure the deck is level for an even cut.
Excessive vibration can be caused by several factors, including unbalanced blades or debris caught in the deck. Check the blades for damage and balance, and clear any debris from the deck. If the problem persists, consult a professional.
To improve traction, consider using tire chains or adding wheel weights. Ensure the tires are properly inflated and use lower gears when navigating difficult terrain.
For winter storage, clean the tractor thoroughly, change the oil, and add a fuel stabilizer to the fuel tank. Remove the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
To replace the blades, ensure the tractor is turned off and on a stable surface. Use a wrench to remove the blade bolts and carefully remove the old blades. Install the new blades, ensuring they are properly aligned and securely fastened.
If the transmission is not engaging, check the drive belt for wear or damage and replace if necessary. Ensure the linkage is properly adjusted and inspect for any blockages. If issues persist, consult a professional technician.