Simplicity 2691178-00 Broadmoor Parts Manual
![Simplicity 2691178-00 Broadmoor Tractor manual cover](/images/dlWQCDJTYPgIUzmKGsWcIXMO/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up, which helps the oil drain out smoothly. Turn off the engine, and use a wrench to remove the drain plug located at the bottom of the engine. Allow the oil to fully drain into a container. Replace the drain plug and fill the engine with the recommended oil type and amount as specified in the manual.
First, check the fuel level and ensure there is enough fuel. Verify that the battery is charged and the connections are clean and tight. Inspect the spark plug for wear or damage and replace it if necessary. Ensure that all safety switches are engaged properly. If the problem persists, consult the manual or contact a service professional.
To adjust the mower deck height, locate the height adjustment lever on the tractor. Move the lever to the desired cutting height position. Refer to the manual for specific height settings suitable for your lawn conditions.
Before storing the tractor for winter, clean the exterior, change the oil, and remove the battery for storage in a cool, dry place. Add fuel stabilizer to the fuel tank and run the engine for a few minutes to circulate it. Lubricate all moving parts and cover the tractor to protect it from dust and moisture.
Ensure the tractor is on a flat surface and the engine is off. Remove the ignition key and disconnect the spark plug. Use a wrench to remove the blade bolts, taking care to support the blade. Replace with new blades, ensuring they are properly aligned and securely fastened. Reconnect the spark plug once done.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol content as it can cause damage to the engine.
Check if the mower deck is level and adjust if necessary. Ensure the tire pressure is equal on all wheels and the blades are sharp and not damaged. Clean any debris from the deck and blades. If the problem continues, consult the manual or a professional.
Inspect the air filter every 25 hours of operation or more frequently in dusty conditions. Replace the air filter annually or when it appears dirty or damaged to ensure optimal engine performance.
Excessive vibration may be caused by unbalanced or damaged blades, loose engine or mower deck components, or uneven tire pressure. Check and tighten any loose parts, balance or replace blades, and ensure tires are inflated to the recommended pressure.
Conduct a safety inspection by checking that all safety switches and guards are in place and functioning. Inspect the brakes, steering, and lights for proper operation. Ensure all bolts and nuts are tight, and check for any visible damage or wear. Regularly review the manual for additional safety guidelines.