Simplicity 2690956 Legacy XL Parts Manual
![Simplicity 2690956 Legacy XL Tractor manual cover](/images/MhMdsnYqbvrxFBAFUnMzSfws/thumbs/thumb175x175.webp)
To change the oil, first ensure the engine is off and cool. Locate the oil drain plug under the engine, place an oil pan beneath it, and remove the plug. Allow the old oil to drain completely. Replace the drain plug, remove the oil filter, and install a new one. Finally, refill with the recommended oil type and quantity as specified in the manual.
Refer to the manufacturer's specifications for the correct tire pressure, which is typically found in the owner's manual or on a sticker on the tractor itself. Generally, front tires require between 12-14 PSI and rear tires require 10-12 PSI. Adjust as necessary for optimal performance.
If the tractor won't start, check the battery connections for corrosion and ensure they are tight. Verify that the battery is charged. Check the fuel level and ensure the fuel valve is open. Inspect the spark plugs and replace them if they are worn or fouled. Consult the manual for further troubleshooting steps if the issue persists.
Perform regular maintenance as outlined in the owner's manual. This typically includes checking fluid levels, greasing fittings, inspecting belts and blades, and changing the oil every 50 hours of operation. Additionally, conduct a thorough inspection at the start and end of each season.
Clean the tractor thoroughly to prevent rust and corrosion. Drain or stabilize the fuel system to prevent fuel deterioration. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture, and store it in a dry, sheltered location.
Check the tire pressure to ensure it's even all around. Inspect the mower blades for wear and damage, sharpening or replacing them as necessary. Adjust the mower deck level according to the manual's instructions. Ensure all deck components are properly aligned and free of debris.
To replace the drive belt, first remove the mower deck for better access. Release the tension on the belt by pivoting the idler pulley. Remove the old belt from the pulleys, and install the new belt following the belt path diagram located in the manual. Re-tension the belt and reattach the mower deck.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends with more than 10% ethanol to prevent engine damage. Always consult your owner's manual for any specific fuel recommendations.
To clean the air filter, first remove the air filter cover. Inspect the paper element and gently tap it to remove loose dirt. If it is excessively dirty, replace it. Clean the foam pre-filter with soapy water, rinse it thoroughly, and allow it to dry completely before reinstalling.
To improve traction, consider using tire chains or weights to increase stability. Adjust tire pressure according to the manual for optimal grip. Ensure the ground speed is appropriate for the conditions and avoid sudden stops or starts to maintain traction.