Simplicity 2690952 Conquest Parts Manual
![Simplicity 2690952 Conquest Tractor manual cover](/images/bwGBlfJLPEShgCsWrFIPJClF/thumbs/thumb175x175.webp)
To change the oil, first warm up the engine, then turn it off. Locate the oil drain valve, attach a hose to it, and drain the old oil into a container. Replace the oil filter and refill with recommended oil type and quantity.
The recommended tire pressure for the Simplicity 2690952 Conquest Tractor is usually found in the operator's manual, but it's typically around 10-14 psi for front tires and 6-10 psi for rear tires.
Check the battery connections and charge if necessary, inspect the spark plugs for any damage, and ensure the fuel level is adequate. If the problem persists, consult a professional technician.
Examine the PTO switch and belt for any damage or disconnection. Ensure that the safety interlocks are functioning properly and consult the manual for further troubleshooting steps.
Regular maintenance should be performed every 50 hours of operation or annually, whichever comes first. This includes oil change, air filter replacement, and inspection of belts and blades.
Use unleaded gasoline with an octane rating of at least 87. Avoid using gasoline with more than 10% ethanol content.
To adjust the cutting height, use the lever located on the right side of the operator's seat. Move the lever to the desired position to raise or lower the mower deck.
Inspect the mower blades for balance and sharpness, check the belt tension and alignment, and ensure the engine mounts are secure. Excessive vibration may indicate the need for blade replacement or balancing.
Remove the air filter cover and take out the filter. Clean it by tapping gently to remove dirt or replace it if necessary. Ensure the filter is dry before reinstalling it.
The Simplicity 2690952 Conquest Tractor is not recommended for use on slopes exceeding 15 degrees to prevent rollover and ensure operator safety. Always operate at slower speeds on slopes.