Simplicity 2690949 Broadmoor Parts Manual

To start the Simplicity 2690949 Broadmoor Tractor, ensure it's on a flat surface, the parking brake is engaged, and the blades are disengaged. Insert the key and turn it to the 'start' position while ensuring the throttle is set to 'fast'.
If the tractor won't start, check the battery for charge, ensure the spark plug is clean, and verify that the fuel tank is not empty. Also, make sure the parking brake is engaged and the PTO is off.
The oil in your Broadmoor Tractor should be changed after the first 5 hours of use and then every 50 hours thereafter. Always use the recommended oil type as specified in the manual.
The recommended tire pressure for the Simplicity 2690949 Broadmoor Tractor is typically 10 psi for the front tires and 14 psi for the rear tires. Always check the manual for confirmation.
To change the mower deck belt, first disengage the PTO and remove the mower deck. Then, release the belt tension and remove the old belt. Install the new belt ensuring it is seated properly and reassemble in reverse order.
To sharpen the blades, first remove them from the mower deck. Use a grinder or a file to sharpen the cutting edge evenly. Ensure the blade is balanced before reinstalling it.
Uneven cutting can be caused by a misleveled deck, dull blades, or improper tire pressure. Check and adjust the deck leveling, sharpen the blades, and ensure the tires are inflated to the correct pressure.
Before storing for winter, clean the tractor, change the oil, add a fuel stabilizer, and disconnect the battery. Store in a dry location and cover it to protect from dust and moisture.
To fix a flat tire, first remove the wheel from the tractor. Then, either patch the inner tube or replace it. Reinstall the wheel ensuring it's securely fastened.
Excessive vibration can be caused by unbalanced blades, loose components, or engine issues. Check and balance the blades, tighten any loose parts, and inspect the engine for any other potential problems.