Simplicity 2690947 Broadmoor Parts Manual
![Simplicity 2690947 Broadmoor Tractor manual cover](/images/XSlsVzGPxybEmpAvJbiMPYdA/thumbs/thumb175x175.webp)
The recommended oil type for the Simplicity 2690947 Broadmoor Tractor is SAE 30 for temperatures above 32°F (0°C) and 10W-30 for varying temperature conditions.
To change the mower deck belt, first ensure the tractor is off and parked on a level surface. Lower the deck, remove the belt covers, release the belt tension, and carefully remove the old belt from the pulleys. Install the new belt following the reverse order.
If your Broadmoor tractor won't start, check the battery connections, ensure the fuel tank has gas, inspect the spark plug, and verify that the PTO switch is off. If the problem persists, consult the manual or contact a professional.
Regular maintenance should be performed every 25 hours of operation, including checking the oil level, air filter, and tire pressure. Comprehensive maintenance should be done annually or every 100 hours, whichever comes first.
To level the mower deck, park the tractor on a flat surface, measure the height of the blades from the ground on both sides, and adjust the deck hangers until both sides are equal.
The correct tire pressure for the Simplicity Broadmoor tractor is typically 10 psi for the front tires and 8 psi for the rear tires. Always check the owner's manual for specific recommendations.
To troubleshoot uneven cutting, ensure the mower deck is level, check the condition and sharpness of the blades, and inspect the tire pressure. Uneven terrain and mowing speed can also affect cut quality.
Yes, the Broadmoor tractor can be equipped with a snow blower or plow attachment for snow removal. Ensure you follow the attachment instructions and safety guidelines.
To clean the air filter, remove the filter cover, take out the filter, and clean it with compressed air or replace it if it's too dirty. Make sure to reinstall it properly.
If the PTO does not engage, check the PTO switch and wiring, ensure the battery is charged, and inspect the drive belt for wear or damage. Consult the service manual for detailed troubleshooting steps.