Simplicity 2690940-01 Regent Parts Manual
![Simplicity 2690940-01 Regent Tractor manual cover](/images/TrntJokJlTqZMwhGPPQPjoig/thumbs/thumb175x175.webp)
To start the Simplicity 2690940-01 Regent Tractor, ensure the parking brake is engaged, the PTO is disengaged, and the throttle is set to the 'fast' position. Turn the ignition key to the 'start' position and release it once the engine starts.
Use SAE 30 oil for the engine when operating in temperatures above 32°F (0°C). If temperatures are consistently below 32°F (0°C), use SAE 5W-30 oil for optimal performance.
Check the battery connections for corrosion or looseness, ensure the fuel tank has sufficient fuel, and verify that the spark plug is functioning properly. Additionally, confirm that the safety switches are engaged correctly.
Remove the air filter cover, take out the air filter, and inspect it for dirt and damage. Clean it using compressed air if reusable, or replace it if it's a paper filter or shows signs of damage. Reinstall the filter and secure the cover.
Check the PTO switch and ensure it is in the 'engage' position. Inspect the drive belts for wear or damage and replace if necessary. Also, verify that the safety interlocks are not preventing engagement.
Change the oil every 50 hours of operation or at the start of each mowing season, whichever comes first. Always replace the oil filter when changing the oil.
The recommended tire pressure for the front tires is 14 PSI and for the rear tires is 10 PSI. Regularly check and maintain these pressures for optimal performance and safety.
After each use, use a garden hose to spray off any grass clippings and debris from the mower deck. For thorough cleaning, use a scraper or brush to remove stubborn grass buildup and ensure all discharge chutes are clear.
Clean the tractor thoroughly, change the oil, and drain the fuel system or add a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
Locate the height adjustment lever on the right side of the tractor. Move the lever to the desired cutting height position, ensuring it locks into place for consistent mowing results.