Simplicity 2690932 Conquest Parts Manual
![Simplicity 2690932 Conquest Tractor manual cover](/images/xaXwUGjvqnRXGmEpxQIAtFyL/thumbs/thumb175x175.webp)
To start the Simplicity 2690932 Conquest Tractor, ensure that the parking brake is engaged, the PTO is disengaged, and the transmission is in neutral. Turn the ignition key to the 'Start' position until the engine starts, then release the key to the 'Run' position.
If the engine doesn't start, check the battery connections for corrosion, ensure the fuel tank has enough fuel, and that the fuel shut-off valve is open. Also, check the spark plug for any signs of wear or damage.
The oil in your Simplicity 2690932 Conquest Tractor should be changed every 50 hours of operation or at least once per season, whichever comes first. Use the manufacturer's recommended oil type and viscosity.
The Simplicity 2690932 Conquest Tractor is designed to operate on clean, fresh, unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline containing more than 10% ethanol.
To troubleshoot uneven mowing, check the tire pressures to ensure they are equal, inspect the mower deck for levelness, and ensure the blades are sharp and properly installed. Adjust the deck height if necessary.
If the transmission slips, check the transmission fluid level and top it up if necessary. Inspect the drive belt for wear and tension, and replace it if worn. If the problem persists, consult a professional technician.
To maintain the battery, keep the terminals clean and free of corrosion. Ensure that the battery is secured in place and check the charge level periodically. Charge the battery fully before storing the tractor for long periods.
To store the tractor for winter, clean the exterior, change the oil, and add a fuel stabilizer to the fuel tank. Remove the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
Excessive vibration can be caused by imbalanced or damaged blades, loose parts, or worn engine mounts. Inspect the blades for damage, ensure all bolts and nuts are tight, and check the engine mounts for wear.
To replace the mower blades, first disconnect the spark plug wire. Then, lift the mower deck and secure it. Use a wrench to remove the blade bolt, replace the blade, and tighten the bolt securely. Reconnect the spark plug wire before use.