Simplicity 2690757 Broadmoor Parts Manual
![Simplicity 2690757 Broadmoor Tractor manual cover](/images/vpRMgFPkvfMbOBKzMLaeDiZt/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Then, turn off the engine and place an oil pan under the drain plug. Remove the drain plug and allow the old oil to completely drain out. Replace the drain plug and refill the engine with new oil as per the manufacturer's specifications.
The recommended tire pressure for the Simplicity 2690757 Broadmoor Tractor is typically around 10-14 PSI for the front tires and 6-10 PSI for the rear tires. Always check the owner’s manual for exact specifications.
If the mower deck does not engage, check the drive belt for any signs of wear or damage. Ensure that the PTO switch is in the "on" position. Inspect the electrical connections and fuses related to the PTO system. If the issue persists, consult the service manual or contact a professional technician.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol content to prevent engine damage.
It is recommended to check the air filter every 25 hours of use and replace it if it's dirty. Under normal operating conditions, replace the air filter every 100 hours or annually, whichever comes first.
First, check the fuel level and ensure the fuel shut-off valve is open. Verify that the battery is fully charged and the connections are clean and secure. Examine the spark plug for fouling and replace if necessary. If the problem persists, consult the troubleshooting section of the manual.
To store the tractor for the winter, clean the exterior and underside thoroughly. Change the oil and replace the fuel filter. Fill the fuel tank and add a fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
Regular maintenance includes checking and changing the oil, inspecting the air filter, checking tire pressures, inspecting belts and blades, and lubricating moving parts. Refer to the owner’s manual for a detailed maintenance schedule.
To adjust the cutting height, locate the height adjustment lever on the mower deck. Move the lever to the desired cutting height position. Make sure to adjust both sides evenly for a uniform cut.
Uneven cuts can be caused by a misaligned mower deck, dull blades, or incorrect tire pressure. Ensure the deck is level, sharpen or replace the blades as needed, and adjust tire pressure to the recommended levels.