Simplicity 2690737 Prestige Parts Manual
![Simplicity 2690737 Prestige Tractor manual cover](/images/TlWLMIIlYFSFFodSKEoAdseq/thumbs/thumb175x175.webp)
To change the oil, first ensure the engine is off and cool. Place a pan under the drain plug, remove the plug, and let the oil drain completely. Replace the drain plug, remove the oil filter, and replace it with a new one. Fill the engine with the manufacturer-recommended oil to the specified level.
Use fresh, clean unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol as it may cause damage to the engine.
Check the battery for charge and ensure the terminals are clean and tight. Verify that the fuel is fresh and the fuel filter is not clogged. Examine the spark plugs for wear or damage. Ensure the safety features are engaged properly.
The recommended tire pressure is usually listed in the owner's manual or on the tire itself. Generally, front tires should be inflated to approximately 14 psi and rear tires to about 10 psi.
To adjust the mower deck, park the tractor on a flat surface and lower the deck. Adjust the lift links on each side of the deck to level it, ensuring both sides are at the same height. Use the leveling gauge provided to check the blade height.
The air filter should be checked every 25 hours of operation and replaced every 100 hours, or more frequently in dusty conditions. Always refer to the owner's manual for specific maintenance intervals.
First, turn off the engine and allow it to cool. Check for any blockages in the air intake and cooling fins. Verify coolant levels if applicable and ensure the oil is at the correct level. If the problem persists, consult a professional technician.
Clean the tractor thoroughly and check for any maintenance needs. Add a fuel stabilizer to the fuel tank and run the engine for a few minutes. Disconnect the battery and store it in a cool, dry place. Cover the tractor with a breathable cover.
At the start of each season, check and change the oil, inspect the air and fuel filters, check the spark plugs, inspect the belts and blades, and ensure all safety features are operational. Lubricate all necessary points as per the manual.
Sharpen or replace the mower blades regularly, ensure the deck is clean and free of debris, adjust the deck height appropriately, and maintain proper tire pressure for an even cut.