Simplicity 2690600 Conquest Parts Manual

The recommended oil type for the Simplicity 2690600 Conquest Tractor is SAE 30 oil for temperatures above 32°F (0°C) and 10W-30 for temperatures below 32°F (0°C).
If your Simplicity 2690600 Conquest Tractor is having starting issues, check the battery connections, ensure the fuel valve is open, verify the parking brake is engaged, and check for any blown fuses.
To change the mower deck belt, first ensure the tractor is off and the parking brake is engaged. Remove the mower deck, release the tension on the belt, and then replace the old belt with a new one, ensuring it's properly aligned in all pulleys. Reattach the deck afterwards.
Regular maintenance on the Simplicity 2690600 Conquest Tractor should be performed every 50 hours of operation, including checking and changing the oil, cleaning or replacing the air filter, and inspecting belts and blades.
Excessive vibration can be caused by unbalanced blades or debris caught in the mower deck. Check the blades for damage or imbalance and clear any debris from the deck. If the problem persists, inspect the drive belt and pulleys.
To adjust the cutting height, locate the height adjustment lever or knob, typically found near the operator's seat. Move the lever or turn the knob to the desired cutting height, ensuring it's set evenly on both sides.
For winterization, clean the tractor thoroughly, change the oil, add a fuel stabilizer to the fuel tank, remove the battery and store it in a cool, dry place, and cover the tractor to protect it from the elements.
Power loss when mowing uphill may be due to a clogged air filter, dirty fuel filter, or worn spark plugs. Check and replace these components as necessary. Additionally, ensure the transmission belt isn't slipping.
To improve fuel efficiency, regularly service the engine by changing the oil and air filters, maintain proper tire pressure, and avoid overloading the tractor beyond its capacity.
If the mower blades are not engaging, check the PTO switch, inspect the belt for wear or damage, ensure the battery is fully charged, and verify all safety interlock switches are functioning properly.