Simplicity 2690565 Prestige Parts Manual

To start the Simplicity 2690565 Prestige Tractor, ensure the parking brake is engaged, the transmission is in neutral, and the PTO switch is off. Insert the key into the ignition and turn it to the start position. Release the key once the engine starts.
Regular maintenance tasks include checking and changing the engine oil, replacing the oil filter, cleaning or replacing the air filter, inspecting the spark plug, checking tire pressure, and lubricating moving parts. Refer to the owner's manual for the recommended maintenance schedule.
If the tractor won't start, check the battery connections for corrosion, ensure the battery is charged, and verify that the spark plug is clean and properly gapped. If the problem persists, inspect the fuel system for clogs and ensure the ignition switch is functioning correctly.
To level the mower deck, park the tractor on a flat surface, lower the deck to the desired cutting height, and adjust the deck links on both sides so that the blade tips are equidistant from the ground. Use a ruler to measure the height for accuracy.
Use fresh, clean, unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol content, as it can damage the engine components.
To change the oil, warm up the engine, then turn it off and remove the ignition key. Drain the old oil by removing the oil drain plug and allowing the oil to fully drain into a pan. Replace the drain plug, remove the old oil filter, and install a new one. Refill the engine with the recommended oil grade.
Ensure the blades are sharp and balanced, the deck is clean and level, and the tires are properly inflated. Mow at the correct speed and height for your grass type and avoid mowing when the grass is wet.
If the engine overheats, stop the tractor immediately and allow it to cool down. Check the engine cooling fins for debris and clean them if necessary. Ensure the engine oil level is correct and that the cooling system is functioning properly.
To replace the drive belt, first disconnect the spark plug wire. Remove the mower deck and locate the belt. Loosen the belt tension and remove the old belt. Install the new belt following the belt routing diagram located on the deck or in the manual, then re-tension the belt and reattach the mower deck.
Always read and understand the operator's manual before use. Wear appropriate safety gear, such as sturdy shoes and safety glasses. Keep hands and feet away from moving parts, and never carry passengers. Be aware of your surroundings and avoid operating on steep slopes or near obstacles.