Simplicity 2690496 Regent Parts Manual
![Simplicity 2690496 Regent Tractor manual cover](/images/ipDhxsXzVzrhoZopJKNCMphO/thumbs/thumb175x175.webp)
To change the oil, first warm up the engine to allow the oil to drain smoothly. Turn off the engine and disconnect the spark plug wire. Place a pan under the drain plug, remove the plug, and let the oil drain completely. Replace the drain plug and refill with the recommended oil type and capacity as per the user manual.
Check the fuel level and ensure the fuel valve is open. Inspect the battery connections for corrosion and ensure they're tightly connected. Verify that the spark plug is functioning properly and replace it if necessary. Additionally, ensure the seat switch is engaged and the transmission is in neutral or park.
Regularly clean the mower deck to prevent grass buildup. Check the blades for sharpness and balance, and sharpen or replace them as needed. Inspect the belts and pulleys for wear and replace them if necessary. Lubricate all pivot points and spindles as recommended in the manual.
The Simplicity 2690496 Regent Tractor is designed to run on unleaded gasoline with a minimum octane rating of 87. Avoid using E15 or E85 ethanol blends, and do not store fuel in the tank for more than 30 days to prevent engine issues.
Locate the cutting height adjustment lever, which is typically positioned near the driver's seat. Move the lever to select the desired cutting height, ensuring that the deck is level. Refer to the user manual for specific height settings and recommendations.
Uneven cutting can be caused by a damaged or unbalanced blade, incorrect tire pressure, or an improperly leveled deck. Inspect the blades and replace if necessary, ensure all tires are inflated to the recommended PSI, and adjust the deck height for uniform cutting.
The air filter should be checked every 25 hours of operation and replaced at least once a season or sooner if it appears dirty or clogged. Operating in dusty or dirty conditions may require more frequent replacement.
To sharpen the mower blades, first disconnect the spark plug wire for safety. Remove the blades from the mower deck. Use a grinder or file to sharpen the cutting edge, ensuring to maintain the original angle. Balance the blades before reinstalling them to prevent vibration.
Check for debris caught in the mower deck. Inspect the blades for damage or imbalance, and replace or sharpen them as necessary. Examine the deck belt for wear and tension, adjusting or replacing it if needed. Ensure all mounting bolts are secure.
For winter storage, clean the tractor thoroughly. Drain the fuel or add a fuel stabilizer. Change the oil and replace the oil filter. Remove the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.