Simplicity 2690439 Regent Parts Manual
![Simplicity 2690439 Regent Tractor manual cover](/images/oCawFlAbIOxhucSqKAABBVdj/thumbs/thumb175x175.webp)
To start the Simplicity 2690439 Regent Tractor, ensure the parking brake is engaged, the throttle is set to the choke position, and the PTO is off. Then, turn the ignition key to the start position until the engine starts.
If the engine does not start, check the battery connections, ensure there is fuel in the tank, and verify that the spark plug is functioning correctly. Also, make sure the safety features like the seat switch are not preventing the engine from starting.
Oil should be changed every 50 hours of operation or at the start of each season. Always refer to the owner's manual for specific oil type and changing procedures.
The recommended oil is SAE 10W-30 for most conditions. However, check the owner’s manual for specific recommendations based on your climate.
Regularly sharpen the blades and keep the deck clean from grass clippings. Also, maintain proper tire pressure for even cutting and adjust the deck height as needed.
Check the transmission fluid level and inspect the drive belt for wear or damage. Ensure the freewheel control is in the drive position and consult the manual for further troubleshooting steps.
To clean the mower deck, remove the spark plug wire for safety, then use a garden hose to rinse off grass clippings and debris. For a deeper clean, use a scraper to remove stuck-on material.
Excessive vibration may be caused by unbalanced or damaged blades, loose bolts, or worn out bearings. Inspect these components and resolve any issues to reduce vibration.
Uneven cutting can be due to improper deck leveling, dull blades, or incorrect tire pressure. Ensure the deck is level, blades are sharp, and tire pressures are even on both sides.
For winter storage, clean the tractor thoroughly, change the oil, add a fuel stabilizer to the gas tank, remove the battery, and store it in a dry place. Cover the tractor to protect it from dust and moisture.