Simplicity 2690351 Legacy XL Parts Manual
![Simplicity 2690351 Legacy XL Tractor manual cover](/images/nElPABctAnrqfUcXOhMipYhp/thumbs/thumb175x175.webp)
To engage the PTO, ensure the tractor is on a flat surface. Depress the clutch and move the PTO switch to the "Engage" position. Release the clutch slowly while keeping an eye on the PTO indicator light.
For optimal performance, use SAE 10W-30 oil with an API classification of SF, SG, SH, SJ, or higher. Always check the owner's manual for specific recommendations based on your climate.
First, check the battery connections for corrosion and ensure they are tight. Verify the fuel level and check for clogged fuel filters. Inspect the spark plug for wear and replace if necessary.
The air filter should be inspected every 50 hours of operation and replaced if necessary. Under dusty conditions, it may need more frequent checks and replacements.
Clean the tractor thoroughly, change the oil, and add a fuel stabilizer. Store the tractor in a dry place and disconnect the battery. Cover the tractor to protect it from dust and debris.
To adjust the cutting height, use the lever located near the operator's seat. Move the lever to select the desired cutting height, ranging from 1 to 4 inches.
Check the transmission fluid level and add fluid if necessary. If the problem persists, inspect the drive belt for wear and proper tension. Replace if needed.
Keep the battery terminals clean and free from corrosion. Ensure the battery is securely mounted and check the charge level regularly. Refill with distilled water if the battery is not maintenance-free.
The recommended tire pressure is typically 12-15 psi for the front tires and 8-10 psi for the rear tires. Always refer to the manual for exact specifications.
Ensure the tractor is on a flat surface and the engine is off. Use a block to prevent the blade from rotating, then remove the bolt holding the blade in place. Replace with a new blade, securing it tightly with the bolt.