Simplicity 2690344 Legacy XL Parts Manual
![Simplicity 2690344 Legacy XL Tractor manual cover](/images/gumBxCmlZzlniLfagwPVhfsP/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine and remove the key. Locate the oil drain valve, place an oil pan underneath, and open the valve to drain the old oil. Replace the oil filter with a new one. Close the drain valve and refill with the recommended oil type and quantity.
If the tractor won't start, check the battery connections for corrosion and ensure they are tight. Verify that the fuel tank is not empty and the fuel is fresh. Check the spark plug for wear or damage. If these steps do not resolve the issue, consult the manual or a professional technician.
Regularly clean the mower deck to prevent grass buildup. Sharpen the blades at least once a season for a clean cut. Check the belt tension and adjust if necessary. Lubricate the spindles and other moving parts as recommended in the manual.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol content to prevent engine damage.
Ensure the tire pressures are equal and at the recommended level. Check that the mower deck is level from side to side and front to back. Inspect the blades for damage or dullness and sharpen or replace as needed.
Perform an oil change every 50 hours of operation or annually, whichever comes first. Clean or replace the air filter every 25 hours. Check and clean the spark plug annually. Lubricate all grease points every 25 hours. Refer to the manual for a detailed maintenance schedule.
First, disconnect the spark plug to prevent accidental starting. Remove the mower deck as per the instructions in the manual. Release the tension on the old belt and remove it. Install the new belt, ensuring it is properly seated in all pulleys, and re-tension it according to specifications. Reattach the mower deck.
Clean the tractor thoroughly to remove dirt and debris. Drain the fuel or add a fuel stabilizer to prevent degradation. Change the oil and filter. Remove the battery and store it in a cool, dry place. Cover the tractor or store it in a sheltered area to protect it from the elements.
Check the cooling fins and air intake for debris and clean them. Ensure the engine has the correct oil level and the oil is in good condition. Inspect the radiator for blockage or leaks. If overheating persists, consult a professional technician.
Follow the recommended maintenance schedule diligently. Store the tractor in a covered area to protect it from weather damage. Regularly inspect and replace worn parts. Use only recommended fuels and lubricants. Keep the tractor clean and free of debris.