Simplicity 2690306 Legacy XL Parts Manual
![Simplicity 2690306 Legacy XL Tractor manual cover](/images/ibQAtNbvvcJiiMbQSCOZJYCv/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine and remove the key. Place an oil pan under the engine, remove the drain plug, and allow the old oil to drain completely. Replace the drain plug and remove the oil filter. Install a new oil filter and pour new oil into the engine according to the specifications in the user manual.
If the tractor won't start, check to ensure the battery is charged and properly connected. Examine the fuel level and add fuel if necessary. Verify that the safety switches are engaged. If the issue persists, inspect the spark plugs and replace them if they appear worn or damaged.
Regular maintenance should be performed every 50 hours of operation or at least once per season, whichever comes first. This includes checking and changing the oil, inspecting the air filters, and checking tire pressure and other components for wear and tear.
The Simplicity 2690306 Legacy XL Tractor is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol-blended fuels with more than 10% ethanol.
First, check that the mower deck is level. Adjust the deck height and tire pressure to ensure even cutting. Inspect the blades for sharpness and damage; sharpen or replace them as necessary. Make sure the deck is clean and free of debris.
To winterize your tractor, clean the exterior and remove any dirt or debris. Change the oil and add a fuel stabilizer to the fuel tank. Disconnect the battery and store it in a cool, dry place. Cover the tractor with a tarp to protect it from the elements.
To improve traction, ensure that the tires are properly inflated and consider adding wheel weights or tire chains. You can also adjust the ballast by adding weight to the rear of the tractor.
Check the transmission fluid level and top it off if necessary. Inspect the linkage and cables for damage or wear, and adjust or replace them as needed. If the problem persists, consult the user manual or contact a professional for further diagnosis.
To replace the mower blades, first disconnect the spark plug wire for safety. Raise the mower deck to access the blades. Use a wrench to remove the blade bolts and then replace the old blades with new ones. Make sure the blades are properly aligned before securing them with the bolts.
To clean the air filter, remove it from the engine and tap it gently to remove loose dirt and debris. If it's a foam filter, wash it with warm soapy water and allow it to dry completely before reinstalling. For paper filters, consider replacing them if they are too dirty.