Simplicity 2690295 Legacy XL Parts Manual
![Simplicity 2690295 Legacy XL Tractor manual cover](/images/ITDtoArRiMvtMkliiBziNUWK/thumbs/thumb175x175.webp)
Regular maintenance should be performed every 50 hours of operation or annually, whichever comes first. This includes changing the oil, checking the air filter, and inspecting belts and blades.
First, check the battery and ensure it is fully charged. Next, inspect the spark plug for wear or damage. Finally, verify that the fuel is fresh and that the fuel filter is clean.
Use SAE 10W-30 engine oil for the best performance in most climates. Always refer to the owner's manual for specific oil recommendations.
First, ensure the tractor is turned off and the parking brake is engaged. Use a wrench to remove the blade bolts, then replace the old blades with new ones, ensuring they are installed with the correct orientation.
Check the steering linkage and tie rods for wear or damage. Tighten any loose components and replace parts as necessary. Regular lubrication of the steering components may also improve responsiveness.
The cutting height can be adjusted using the lever located on the tractor's dashboard. Move the lever to the desired position to raise or lower the mower deck.
Clean the tractor thoroughly and remove any grass or debris. Add a fuel stabilizer to the gas tank and run the engine for a few minutes. Store the tractor in a dry, covered area. Disconnect the battery to prevent discharge.
Excessive vibration can be caused by unbalanced blades or debris lodged in the mower deck. Check the blades and clean the deck. If the problem persists, inspect the engine mounts and tighten if necessary.
Ensure regular maintenance, such as changing the oil and air filter, is performed. Keep the tires properly inflated and avoid excessive idling to improve fuel efficiency.
Inspect the radiator and engine cooling fins for debris and clean them thoroughly. Check the coolant level and ensure the radiator cap is tightly sealed. Examine the drive belts for wear or slippage.