Simplicity 2690287 Legacy XL Parts Manual

To change the oil, first warm up the engine to ensure that the oil flows out smoothly. Turn off the engine and remove the oil drain plug to let the oil drain into a pan. Replace the drain plug and remove the oil filter. Install a new oil filter and fill the engine with the recommended oil type and capacity specified in your owner's manual.
Check if the battery is charged and terminals are clean. Ensure the fuel tank has sufficient fuel and the fuel valve is open. Inspect the spark plug for wear or damage and replace it if necessary. Review the operator's manual for specific troubleshooting steps or consult a professional if the issue persists.
Regular maintenance should be performed every 50 hours of operation, including oil changes, air filter cleaning/replacement, and checking belt tension. Refer to the maintenance schedule in your owner's manual for detailed intervals and procedures.
Use unleaded gasoline with an octane rating of at least 87. Avoid using gasoline with more than 10% ethanol content to prevent damage to the engine components.
To adjust the cutting height, locate the height adjustment lever or knob on your tractor. Move it to the desired height setting according to your mowing needs. Ensure the tractor is on a flat surface when making adjustments for accuracy.
Turn off the engine and disconnect the spark plug. Raise the deck to its highest position and use a hose to wash away grass clippings and debris. For stubborn debris, use a scraper or brush. Ensure the deck is dry before reconnecting the spark plug and starting the engine.
Check if the tire pressure is equal on all sides and ensure that the mower deck is level. Inspect the blades for sharpness and damage, and replace them if necessary. Verify that the spindle assembly is functioning correctly and that there are no obstructions under the deck.
Improving traction can be achieved by adding wheel weights or tire chains, especially in slippery conditions. Ensure that the tires are in good condition and properly inflated according to the manufacturer's recommendations.
Clean the tractor thoroughly, change the oil, and add a fuel stabilizer to the gas tank. Remove the battery and store it in a cool, dry place. Inflate the tires to the recommended pressure and cover the tractor to protect it from the elements.
First, disconnect the spark plug and remove the mower deck. Release the belt tensioner and remove the old belt. Install the new belt following the routing diagram typically found in the owner's manual or under the tractor's hood. Reattach the mower deck and reconnect the spark plug.