Simplicity 2690262 Conquest Parts Manual
![Simplicity 2690262 Conquest Tractor manual cover](/images/tlcpBMGcrcGKiXDtmLosneqT/thumbs/thumb175x175.webp)
Regular maintenance includes checking the oil level, cleaning the air filter, inspecting the spark plugs, and lubricating all moving parts. Refer to the user manual for a detailed maintenance schedule.
Check the battery connections, ensure there's fuel in the tank, verify the spark plug condition, and inspect the fuse. If the problem persists, consult the troubleshooting section of the manual.
Ensure the blades are sharp and properly balanced. Adjust the cutting height to the desired level and remove any debris from the deck. Regularly clean the underside of the mower deck to prevent clogging.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 5W-30 or 10W-30 for colder conditions. Always check the owner’s manual for the most accurate information.
To replace the drive belt, first disconnect the spark plug, remove the mower deck, and then the old belt. Install the new belt following the routing diagram in the user manual. Reattach the deck and reconnect the spark plug.
Excessive vibration can be caused by unbalanced or damaged blades, loose nuts or bolts, or debris lodged in the mower deck. Inspect these areas and correct any issues found.
The air filter should be checked before each use and replaced if dirty or damaged. As a general rule, replace the air filter every 100 hours of operation or annually, whichever comes first.
Ensure the engine cooling fins are clean and unobstructed. Check the oil level and ensure it is filled to the recommended level. If overheating persists, consult a professional technician.
To winterize, clean the tractor, change the oil, add a fuel stabilizer, and store the battery in a dry place. Cover the tractor and store it in a sheltered area.
Check the PTO (Power Take-Off) switch and ensure it is in the correct position. Inspect the belt for damage or wear, and verify that all electrical connections to the PTO clutch are secure.