Simplicity 2690238 Regent Parts Manual
![Simplicity 2690238 Regent Tractor manual cover](/images/nkQBCZrWMCzzDxqbyKTlhVCr/thumbs/thumb175x175.webp)
The Simplicity 2690238 Regent Tractor requires unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol-blended fuels with more than 10% ethanol content.
It is recommended to change the oil after the first 5 hours of use and then every 50 hours of operation or at the beginning of each season.
First, ensure the battery is fully charged and the connections are clean and tight. Check the fuel level and ensure the fuel valve is open. Verify that the spark plug is clean and properly gapped. If the problem persists, consult the manual or a professional technician.
Clean the tractor thoroughly, change the oil, and empty the fuel tank or use a fuel stabilizer. Store the tractor in a dry, sheltered area and disconnect the battery to prevent drainage.
Before each use, check the oil level, inspect the air filter, ensure the tires are properly inflated, and verify that the blades are sharp and secure.
To adjust the cutting height, locate the height adjustment lever on the tractor's right side. Move the lever to the desired position, which ranges from 1.5 to 4 inches.
Check the PTO (Power Take-Off) switch to ensure it is engaged. Inspect the belt for wear or damage and ensure it is properly tensioned. If the issue continues, consult a service technician.
Locate the air filter housing, remove the cover, and take out the old filter. Insert the new filter and replace the cover securely. Ensure the new filter is compatible with your model.
Excessive vibration can be caused by unbalanced or damaged blades, loose components, or uneven tire pressure. Inspect and balance the blades, tighten any loose parts, and check the tires for proper inflation.
Maintain regular servicing, keep the air filter clean, ensure the tires are properly inflated, and avoid overloading the tractor. By optimizing these factors, you can enhance fuel efficiency.