Simplicity 2690189 Legacy XL Parts Manual
![Simplicity 2690189 Legacy XL Tractor manual cover](/images/AIZKFNjPazkjoTSfcrsEIBiZ/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine and remove the drain plug to let the old oil drain out completely. Replace the drain plug and add new oil to the engine, checking the dipstick to ensure the proper level.
Check the battery connections to ensure they are clean and tight. Verify that the fuel tank has fuel and that the fuel shut-off valve is open. Check the spark plug for wear and replace if necessary. Make sure the transmission is in neutral and the parking brake is engaged.
Sharpen the mower blades at least once a season or after 25 hours of use. Dull blades can tear the grass rather than cut it cleanly, which can damage your lawn.
Regularly check the battery terminals for corrosion and clean them with a baking soda solution if needed. Ensure that the battery is securely mounted and check the charge level periodically. During off-season storage, disconnect the battery or use a trickle charger to maintain its charge.
To adjust the cutting height, locate the deck lift lever on the tractor. Move the lever to the desired cutting height position. You may need to adjust the mower deck wheels to ensure an even cut.
First, check the engine coolant level and add coolant if necessary. Ensure that the radiator and cooling fins are free of debris. Verify that the engine oil level is correct, as oil also aids in cooling.
Consider using tire chains or weights for better traction. Ensure your tires are properly inflated and in good condition. Adjust the ballast to improve weight distribution.
Check the power steering fluid level and top up if necessary. Inspect the steering linkage for any damage or wear, and lubricate all pivot points. If the problem persists, the power steering pump may need attention.
Clean the tractor thoroughly and apply a rust preventive to exposed metal parts. Change the oil and filter, and top off all fluids. Disconnect the battery and store it in a cool, dry place. Cover the tractor with a breathable cover to protect it from dust and moisture.
First, ensure the tractor is turned off and remove the mower deck. Locate the drive belt and release the tensioner to remove the old belt. Install the new belt, ensuring it is seated correctly on all pulleys, and re-tension the belt. Reattach the mower deck.