Simplicity 2690186 Legacy XL Parts Manual
![Simplicity 2690186 Legacy XL Tractor manual cover](/images/ImppLYxdktvkiOrwvKfqPmOl/thumbs/thumb175x175.webp)
To change the oil, first warm up the engine to ensure the oil flows easily. Turn off the engine and disconnect the spark plug. Place a container under the oil drain valve, open the valve, and let the oil drain completely. Replace the oil filter and add the recommended oil type and quantity.
The maintenance schedule includes checking the oil level before each use, changing the oil every 50 hours, cleaning the air filter every 25 hours, and inspecting the blades regularly. Refer to the user manual for a comprehensive schedule.
If the tractor won't start, check the battery connections and charge level, inspect the spark plug for wear, ensure the fuel valve is open, and verify that the fuel filter is clean.
Check the PTO engagement lever and ensure it is fully activated. Inspect the belts for wear or damage, and verify that the PTO switch and electrical connections are functioning correctly.
Ensure the blades are sharp and balanced, adjust the cutting height appropriately, and mow at the recommended speed. Regularly clean the underside of the mower deck to prevent grass buildup.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using fuel with more than 10% ethanol content to prevent engine damage.
Check the recommended tire pressure in the user manual. Use a tire pressure gauge to measure the current pressure and add or release air as needed to achieve the correct pressure.
Excessive vibration can be caused by unbalanced blades or debris caught in the mower deck. Check and balance the blades, and clear any debris from the deck. Inspect the tires for damage or imbalance.
Clean the tractor thoroughly, change the oil, and fill the tank with fuel stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
First, disconnect the spark plug for safety. Remove the mower deck and locate the drive belt. Take note of the belt routing, remove the old belt, and install the new one according to the routing pattern. Reattach the mower deck.