Simplicity 2690178 Conquest Parts Manual
![Simplicity 2690178 Conquest Tractor manual cover](/images/xVmkWNZhnacHONCnXFSESgbo/thumbs/thumb175x175.webp)
To perform regular maintenance, check and change the oil, replace the air filter, inspect the belts, and ensure the tires are properly inflated. Additionally, lubricate all moving parts and check the battery condition regularly.
If the tractor doesn't start, check the battery connections and ensure they are clean and tight. Verify that the fuel tank has fuel and that the fuel shut-off valve is open. Also, inspect the spark plugs and replace them if necessary.
Uneven mowing can be caused by dull blades, incorrect tire pressure, or an uneven deck. Sharpen the blades, check and adjust tire pressure, and level the mowing deck according to the manual's instructions.
To change the oil, run the engine for a few minutes to warm it up. Then, turn off the engine and remove the oil drain plug to drain the old oil. Replace the drain plug and fill the engine with new oil as specified in the owner’s manual.
To adjust the mowing deck height, locate the deck lift lever on the tractor. Move the lever to the desired height setting according to the mowing conditions and your preference.
If the blades do not engage, check the PTO (Power Take-Off) switch and ensure it is in the 'on' position. Inspect the belt for wear or damage and replace if necessary. Also, check the safety interlock system for proper operation.
The air filter should be inspected before each use and replaced every 100 hours of operation or once a season, whichever comes first. Replace it more frequently if you operate in dusty conditions.
For off-season storage, clean the tractor thoroughly, remove the battery, and store it in a cool, dry place. Add a fuel stabilizer to the fuel tank, and store the tractor in a covered, dry area to protect it from the elements.
To check tire pressure, use a tire pressure gauge to ensure the pressure matches the manufacturer's specifications. Adjust the pressure as needed, and check regularly to maintain optimal performance and prevent uneven wear.
Excessive vibration can be caused by unbalanced blades, loose components, or damaged belts. Check and balance the blades, tighten any loose hardware, and inspect the belts for damage. Replace components as needed.