Simplicity 2690138 Legacy XL Parts Manual
![Simplicity 2690138 Legacy XL Tractor manual cover](/images/JTHLzslCwBtdRcXnuNHgQgWr/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface. Warm up the engine for a few minutes, then turn it off. Place an oil pan under the engine and remove the drain plug. Allow the oil to fully drain before replacing the plug. Remove the oil filter and replace it with a new one. Finally, refill the engine with the recommended type and amount of oil.
The Simplicity 2690138 Legacy XL Tractor requires unleaded gasoline with a minimum octane rating of 87. Avoid using E85 or other ethanol blends above 10%.
If the tractor won't start, check the battery connections for corrosion or looseness. Ensure the fuel valve is open and fuel is reaching the engine. Inspect the spark plug for wear or damage and replace if necessary. Also, verify that the safety switches are engaged.
The air filter should be inspected every 25 hours of operation and replaced if it appears dirty or damaged. Under dusty conditions, it may require more frequent checks and replacement.
The recommended tire pressure for the Simplicity 2690138 Legacy XL Tractor is typically 14 psi for the front tires and 10 psi for the rear tires. However, always check the sidewall of the tires or the operator's manual for specific recommendations.
To engage the PTO, first ensure the tractor is at a complete stop. Set the throttle to mid-speed or higher, then slowly engage the PTO lever or switch. Make sure the attachment is properly connected and the area is clear of bystanders.
If the cutting deck is not level, first park the tractor on a flat surface. Measure the height of the blades on each side and adjust the deck lift links accordingly. Refer to the owner's manual for precise adjustment instructions.
To store the tractor, clean it thoroughly to remove grass and debris. Change the oil and ensure all fluids are topped up. Remove the battery and store it in a cool, dry place. Cover the tractor with a breathable material to protect it from dust and moisture.
Yes, synthetic oil can be used in the Simplicity 2690138 Legacy XL Tractor. It provides better temperature stability and protection. Ensure it meets the specifications outlined in the owner's manual.
To check the hydraulic fluid, park the tractor on a level surface and lower all attachments. Locate the hydraulic fluid reservoir and remove the dipstick. Wipe it clean, reinsert, and then remove again to check the level. Add fluid if necessary, using the type specified in the manual.