Simplicity 2690135 Legacy XL Parts Manual
![Simplicity 2690135 Legacy XL Tractor manual cover](/images/uUAKJlViEPzoFzCoFhLOtlCZ/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine and remove the oil drain plug, allowing the old oil to completely drain into a suitable container. Replace the drain plug, remove the oil filter, and install a new one. Finally, refill with the recommended oil type and quantity, checking for leaks once done.
If your tractor won't start, check the battery connections for corrosion or looseness, ensure the battery is charged, and inspect the fuel system for any blockages or stale fuel. Also, examine the spark plugs and replace them if necessary. If problems persist, consult a professional technician.
Regular maintenance should be performed every 50 hours of operation or at least once per season. This includes checking and replacing oil, inspecting belts and blades, lubricating moving parts, and checking tire pressure. Always refer to the owner's manual for specific maintenance schedules.
The Simplicity 2690135 Legacy XL Tractor is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using fuels with high ethanol content as they can damage the engine.
To replace the mower blades, first ensure the tractor is on a level surface and the engine is off with the key removed. Use a block to prevent blade rotation, then use a wrench to remove the blade bolt. Replace with a new blade, ensuring it's installed in the correct orientation, and tighten the bolt securely.
Overheating can be caused by a clogged air filter, low coolant levels, or debris obstructing the radiator. Clean or replace the air filter, check coolant levels, and clear any obstructions from the radiator. If the problem persists, consult with a professional technician.
If the transmission is slipping, check the transmission fluid level and quality. Low or dirty fluid can cause slipping, so refill or replace as necessary. Inspect the drive belt for wear or damage and replace if needed. If issues continue, seek professional assistance.
To store your tractor, clean it thoroughly and perform any necessary maintenance. Add a fuel stabilizer to the tank and run the engine for a few minutes to circulate it. Remove the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
The correct tire pressure for the Legacy XL Tractor is typically between 10 to 14 psi for the rear tires and 14 to 18 psi for the front tires. Always check the tire sidewall or owner's manual for the exact specifications.
To improve fuel efficiency, ensure regular maintenance is performed, including keeping the air filter clean, maintaining proper tire pressure, and using the recommended grade of fuel. Avoid idling for long periods and operate the tractor at optimal speed and load conditions.