Simplicity 2690134 Legacy XL Parts Manual
![Simplicity 2690134 Legacy XL Tractor manual cover](/images/VOaeMoDOMVbjwzLZejOrgpdv/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Turn off the engine and remove the key. Place a pan under the oil drain valve. Open the drain valve and allow the oil to completely drain. Replace the drain valve and add new oil as specified in the owner's manual.
The Simplicity 2690134 Legacy XL Tractor is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol-blended fuels with more than 10% ethanol.
If the engine won't start, check that the battery is charged and the connections are clean and tight. Ensure the fuel tank has fresh gasoline. Check the spark plug for wear or damage and replace if necessary. Also, ensure the safety switches are in the correct position.
The air filter should be checked every 50 hours of use or more frequently in dusty conditions. Replace the air filter if it appears dirty or damaged. Regular maintenance helps ensure optimal engine performance.
First, disconnect the spark plug wire for safety. Lift the deck and remove the blades. Use a file or bench grinder to sharpen each blade evenly. Ensure the blades are balanced before reattaching them to the mower deck.
Regularly check the transmission fluid levels and look for leaks. Change the transmission fluid and filter at the intervals recommended in the owner's manual. Ensure that the cooling fins are clean and free of debris.
Check for any electrical components that may be left on, such as lights. Inspect the battery terminals for corrosion and clean them if necessary. Test the battery and charging system with a multimeter to ensure they are functioning properly.
Clean the tractor thoroughly and remove any grass clippings or debris. Add a fuel stabilizer to the gas tank and run the engine for a few minutes. Change the oil and oil filter. Remove the battery and store it in a cool, dry place. Cover the tractor or store it in a dry, sheltered area.
Check the mower deck belt for wear or damage and replace if necessary. Ensure the PTO switch is functioning correctly. Inspect the deck engage cable for proper tension and adjust if needed.
Ensure the blades are sharp and balanced. Adjust the cutting height to the proper level for your grass type. Check the tire pressure to ensure it is even. Mow when the grass is dry and avoid mowing in the same pattern repeatedly to prevent tire tracks and uneven cuts.