Simplicity 1695415 Conquest Parts Manual
![Simplicity 1695415 Conquest Tractor manual cover](/images/UrRdskkUztUyIZIVcXBZYKpt/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface. Warm up the engine slightly to thin the oil. Turn off the engine and remove the key. Place an oil pan under the engine, remove the oil drain plug, and let the oil drain completely. Replace the drain plug, remove the oil filter, and install a new one. Fill the engine with the recommended type and amount of oil. Check the level with the dipstick and add more if necessary.
If the tractor won't start, check the battery for charge and connections. Ensure the fuel tank has fresh gasoline and the fuel valve is open. Inspect the spark plug for wear or fouling and replace if necessary. Check for any blown fuses. If the problem persists, consult the user manual for additional troubleshooting steps or contact a professional technician.
To store the tractor for winter, clean it thoroughly to remove dirt and debris. Perform maintenance tasks such as oil changes and lubrication. Add a fuel stabilizer to the fuel tank and run the engine for a few minutes to circulate the stabilizer. Disconnect the battery and store it in a cool, dry place. Cover the tractor and store it in a sheltered area.
If the mower deck is not engaging, check the PTO switch and ensure it is in the correct position. Inspect the drive belt for wear or damage and replace if needed. Verify that the safety interlock system is functioning properly. Ensure that all electrical connections are secure and free from corrosion.
To improve cutting performance, ensure the blades are sharp and balanced. Adjust the deck height to the correct level for your grass type. Clean the underside of the deck regularly to prevent grass buildup. Check tire pressure for even cutting and replace worn blades if necessary.
The Simplicity 1695415 Conquest Tractor typically requires SAE 30 oil for temperatures above 32°F (0°C) and 10W-30 or 5W-30 for colder conditions. Always refer to the owner’s manual for specific recommendations based on your climate and usage.
To replace the air filter, turn off the engine and remove the key. Locate the air filter housing, remove the cover, and take out the old air filter. Insert a new air filter and ensure it is seated properly. Replace the cover and secure it. Regularly replacing the air filter helps maintain engine performance.
Regular maintenance includes checking the oil level, inspecting and cleaning the air filter, sharpening or replacing mower blades, checking tire pressure, and lubricating moving parts. Additionally, inspect belts and battery connections, and clean the tractor after each use to prevent buildup.
Uneven cutting can be caused by several issues. Check if the mower deck is level and adjust if necessary. Ensure blades are sharp and balanced. Check tire pressure for consistency. Inspect the deck for obstructions or debris buildup. Regularly maintain the tractor to prevent uneven wear and ensure optimal performance.
To adjust the steering, first ensure the tractor is on a level surface. Check the steering components for wear or damage. Adjust the tie rods to correct any alignment issues. Ensure that the steering wheel is centered and that there is no excessive play. If problems persist, consult the manual or seek professional assistance.