Simplicity 1695100 Prestige Parts Manual
![Simplicity 1695100 Prestige Tractor manual cover](/images/hqQZNjGAHZoWNxtaFjLiDPQW/thumbs/thumb175x175.webp)
To change the oil, first warm up the engine to ensure the oil drains smoothly. Turn off the engine and remove the key. Locate the oil drain valve and place a suitable container underneath. Open the valve to drain the old oil. Replace the oil filter with a new one and close the drain valve. Finally, refill the engine with the recommended oil type and quantity.
If your tractor won't start, check the battery connections to ensure they are clean and tight. Verify that the fuel tank has fuel and that the fuel valve is open. Inspect the spark plugs for fouling or wear and replace if necessary. Also, ensure that all safety switches are engaged, and the PTO is turned off.
Regular maintenance should be performed every 50 hours of operation or annually, whichever comes first. This includes changing the oil, inspecting the air filter, checking the spark plugs, and lubricating moving parts. Always refer to the owner's manual for detailed maintenance schedules.
Ensure your blades are sharp and balanced. Check the tire pressure to ensure even cutting. Adjust the deck level if necessary, and clear any debris or buildup under the deck. Regularly maintain the engine and ensure it is running at optimal speed.
The recommended tire pressure for the Simplicity 1695100 is typically around 10-12 psi for the front tires and 8-10 psi for the rear tires. Always check the sidewalls of the tires or the owner's manual for specific recommendations.
Check that the mower deck is level from side to side and front to back. Examine the condition of the blades and replace if dull or bent. Inspect the tire pressure to ensure it is consistent across all tires. Remove any debris buildup from the underside of the mower deck.
Check the cooling fins on the engine for debris and clean them if necessary. Ensure that the engine oil level is correct, as low oil can cause overheating. Check the air filter for clogs and replace if dirty. Also, verify that the engine is operating at the correct RPM.
To adjust the cutting height, locate the height adjustment lever or knob near the seat or on the fender. Move the lever to the desired position, ensuring all four corners of the deck adjust evenly. Double-check the deck level after adjustment to ensure consistent cutting height.
The recommended oil for the Simplicity 1695100 is typically SAE 10W-30 for general use. However, refer to the owner's manual for specific oil recommendations based on your climate and usage conditions.
To replace the blades, park the tractor on a level surface and engage the parking brake. Disconnect the spark plug wire to prevent accidental starting. Lift the mower deck to its highest position and use a suitable wrench to remove the blade bolt. Remove the old blade, install the new one, and tighten the bolt securely. Reconnect the spark plug wire once finished.