Simplicity 1694639 Legacy XL Parts Manual
![Simplicity 1694639 Legacy XL Tractor manual cover](/images/VYAXUyqaNBxRBwUuwLpTmLCJ/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface. Warm up the engine slightly, then turn it off. Place an oil pan under the engine's drain plug and remove the plug to drain the oil. Replace the drain plug and refill with the recommended type and amount of oil. Finally, check the oil level with the dipstick.
If the tractor won't start, check the battery connections for corrosion and ensure they are tight. Verify the battery is charged. If the problem persists, inspect the fuel system for blockages and ensure the fuel is fresh. Also, check the spark plugs for wear or damage.
Regular maintenance should be performed according to the schedule in the owner’s manual, typically every 50 hours of operation. This includes checking and changing the oil, inspecting belts and hoses, and lubricating moving parts.
The Simplicity 1694639 Legacy XL Tractor typically runs on unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than 10% as they can cause engine damage.
To adjust the cutting height, locate the height adjustment lever or knob on the tractor. Move the lever or turn the knob to the desired cutting height position. Ensure the mower deck is level for an even cut.
If the tractor is overheating, check the cooling fins and air intake for debris and clean them if necessary. Ensure the engine oil level is correct, as low oil can cause overheating. Finally, verify that the cooling fan is operational.
Uneven tire wear can be caused by incorrect tire pressure, misalignment, or worn suspension components. Check and adjust the tire pressure to the manufacturer's specifications, and inspect the alignment and suspension.
To replace the air filter, open the hood and locate the air filter housing. Remove the cover of the housing and take out the old filter. Insert the new filter and replace the cover, ensuring it is securely fastened.
To winterize the tractor, clean it thoroughly and apply a protective wax on painted surfaces. Drain the fuel system or add a fuel stabilizer. Change the oil and lubricate all moving parts. Remove the battery and store it in a cool, dry place.
To check and adjust the belt tension, first turn off the tractor and remove the key. Locate the belt and inspect it for wear or damage. Adjust the tension using the belt tensioner or idler pulley according to the manual's instructions. The belt should have about 1/2 inch of deflection.