Simplicity 1694429 Broadmoor Parts Manual
![Simplicity 1694429 Broadmoor Tractor manual cover](/images/tKsyZLYtfOOVYporwtgXzaTI/thumbs/thumb175x175.webp)
To change the oil, first ensure the tractor is on a level surface. Warm up the engine, then stop it and remove the key. Place an oil pan under the engine, remove the oil drain plug, and let the old oil drain completely. Replace the drain plug, remove the oil filter, and install a new one. Finally, refill the engine with the recommended oil type and quantity.
If your tractor won't start, check the battery connections to ensure they are clean and tight. Verify that the battery is fully charged. Check the fuel level and ensure the fuel valve is open. Inspect the spark plug for wear or damage and replace if necessary. Finally, ensure all safety switches are engaged.
To improve cutting performance, regularly sharpen the mower blades and ensure they are balanced. Check the tire pressure to maintain an even cut. Adjust the cutting height according to the type of grass and conditions. Clean the underside of the mower deck to prevent grass buildup.
The recommended maintenance schedule includes checking the oil level before each use, changing the oil after the first 5 hours and then every 50 hours of operation. Clean or replace the air filter every 25 hours, check the spark plug every 50 hours, and inspect the blades and belts regularly.
To adjust the drive belt tension, first locate the belt tension adjustment rod. Loosen the lock nut, adjust the rod to the correct tension, and then retighten the lock nut. Ensure the belt is properly seated on all pulleys and check for wear or damage.
Excessive vibration can be caused by unbalanced or damaged blades, loose engine mounting bolts, or worn belts. Check and balance the blades, tighten any loose bolts, and inspect the belts for wear. Replace any damaged components to resolve the issue.
To replace the mower deck belt, first disengage the PTO and lower the mower deck. Remove the belt covers and release the belt tension. Remove the old belt from the pulleys and install the new belt, ensuring it is routed correctly. Re-tension the belt and replace the covers.
If the mower deck is not engaging, check the PTO switch and ensure it is functioning properly. Inspect the deck engagement cable for any damage or disconnection. Verify that the drive belt is intact and properly tensioned. Replace or repair faulty components as needed.
Uneven cutting can result from a misaligned deck, uneven tire pressure, or dull blades. Level the mower deck according to the manufacturer's instructions, ensure tire pressures are equal, and sharpen the blades. Regular maintenance can prevent uneven cutting.
To store the tractor for winter, clean it thoroughly to remove grass and debris. Change the oil and filter, and add a fuel stabilizer to the gas tank. Inflate the tires to the recommended pressure and disconnect the battery. Store the tractor in a dry, sheltered location and cover it to protect against dust and moisture.