Simplicity 1694229 Broadmoor Parts Manual
![Simplicity 1694229 Broadmoor Tractor manual cover](/images/iLBypBZzYiwkaZiIBdiQqdQf/thumbs/thumb175x175.webp)
To change the oil, first ensure the engine is off and cool. Remove the oil drain plug and allow the old oil to completely drain into a suitable container. Replace the drain plug and refill with new oil, checking the owner's manual for type and quantity.
If your tractor won't start, check the battery connections for corrosion or looseness, ensure the fuel tank has fuel, and inspect the spark plug for wear. If the problem persists, consult the user manual or contact a professional.
The blades should be sharpened after every 25 hours of mowing or if you notice a decrease in cut quality. Remove the blades and sharpen them using a grinder or file, taking care to maintain the blade's balance.
At the start of each season, change the oil, check the air filter, inspect the fuel system, clean the mower deck, and check the tire pressure. Replace any worn belts or blades.
To replace the drive belt, first remove the mower deck and any belt covers. Note the belt routing and remove the old belt. Install the new belt following the same routing, and ensure all pulleys are properly aligned.
It is recommended to use unleaded gasoline with a maximum of 10% ethanol in your Broadmoor Tractor. Using higher ethanol content fuels can cause damage to the engine.
To adjust the cutting height, use the height adjustment lever located beside the seat. Move the lever to the desired position, ensuring it is securely seated in the notch that corresponds to your desired cutting height.
If the engine overheats, first shut it down and allow it to cool. Check for obstructions in the air intake or cooling fins and ensure that the oil and coolant levels are adequate. If overheating continues, seek professional assistance.
To clean the mower deck, first ensure the engine is off. Use a brush or scraper to remove grass clippings and debris, then rinse with water. Regular cleaning prevents build-up that can affect cutting performance.
The recommended tire pressure for the Simplicity Broadmoor is typically 10 psi for the front tires and 12 psi for the rear tires. Always check the owner's manual for specific recommendations.