Simplicity 1694010 Broadmoor Parts Manual
![Simplicity 1694010 Broadmoor Tractor manual cover](/images/vxJJHrFHaGWFACqlLWlrtLFx/thumbs/thumb175x175.webp)
To start the Simplicity 1694010 Broadmoor Tractor, ensure the parking brake is engaged, the PTO is disengaged, and the throttle is set to the choke position for a cold start. Turn the ignition key to the start position and release once the engine starts.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 5W-30 for temperatures below 32°F (0°C). Always check the owner's manual for specific recommendations based on your operating conditions.
Change the oil in your Simplicity Broadmoor Tractor every 50 hours of operation or at least once per season, whichever comes first. Make sure to also replace the oil filter during each oil change.
If the engine won't start, check the battery charge, ensure the fuel tank has fresh fuel, and verify that the spark plug is clean and in good condition. Additionally, make sure the safety switches are properly engaged.
To adjust the cutting height, locate the cutting height adjustment lever usually found near the operator's seat. Move the lever to the desired cutting height position, ranging from low to high settings.
Excessive vibration could be due to an unbalanced mower deck, loose parts, or damaged blades. Inspect and secure any loose components, and check the blades for damage or imbalance. Replace or repair as necessary.
To improve fuel efficiency, regularly maintain your tractor by changing the oil, replacing air filters, and keeping the tires properly inflated. Ensure the engine is well-tuned and avoid overloading the tractor.
For off-season storage, clean the tractor thoroughly, change the oil, and fill the fuel tank with stabilized fuel. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
To replace the drive belt, first disconnect the spark plug wire for safety. Remove the mower deck and the old belt. Install the new belt according to the routing diagram located in the owner's manual, and then reattach the mower deck.
If the mower deck is not engaging, check the PTO switch and ensure it is functioning correctly. Inspect the belts and pulleys for any signs of wear or damage. Examine the electrical connections for corrosion or disconnection.