Simplicity 1693968 Broadmoor Parts Manual
![Simplicity 1693968 Broadmoor Tractor manual cover](/images/HiFgfCYmHlWHzwDLxoLmCwpG/thumbs/thumb175x175.webp)
To change the oil, first run the engine for a few minutes to warm it up. Then, turn off the engine and locate the oil drain plug. Place an oil pan underneath and remove the plug to drain the oil. Replace the drain plug, and then remove the oil filter. Install a new oil filter, and refill the engine with the recommended oil type and quantity as specified in the manual.
If the tractor won't start, check the battery connections to ensure they are clean and tight. Verify that the battery is charged. Check the fuel level and ensure the fuel valve is open. Inspect the spark plug for wear or damage and replace it if necessary. If the problem persists, consult the user manual for further troubleshooting steps or contact a professional technician.
To improve cutting performance, ensure the blades are sharp and balanced. Clean the underside of the mower deck regularly to prevent grass buildup. Adjust the cutting height to suit the lawn conditions and mow at the correct speed. Regular maintenance, such as checking the belt tension and replacing worn parts, will also help maintain optimal cutting performance.
The recommended tire pressure for the Simplicity 1693968 Broadmoor Tractor is typically listed in the operator's manual. Generally, the front tires should be inflated to around 14 PSI and the rear tires to 10 PSI. Always check the manual for specific recommendations.
To replace the drive belt, first ensure the tractor is on a level surface and the ignition is off. Remove the mower deck for better access, then release the belt tension and remove the old belt from the pulleys. Install the new belt by following the routing diagram in the manual, ensuring it is seated properly on the pulleys. Reinstall the mower deck and test the drive system.
Excessive vibration can be caused by unbalanced or damaged blades, loose components, or worn bearings. Check the mower blades for balance and sharpness. Inspect all hardware and components for tightness and wear. Replace any damaged or worn parts. If the issue continues, consult the manual or a professional technician.
Regular maintenance should be performed at intervals recommended in the operator's manual. This typically includes checking the oil and air filter every 25 hours of operation, changing the oil every 50 hours, and conducting a thorough inspection and lubrication every season. Always refer to the manual for specific maintenance schedules.
The Simplicity 1693968 Broadmoor Tractor is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol content to prevent engine damage. Refer to the manual for detailed fuel recommendations.
To adjust the mower deck level, park the tractor on a flat surface and lower the deck to its lowest position. Measure the distance from the ground to the blade tips on each side. Use the adjustment nuts on the deck lift links to level the deck, ensuring the measurements are equal on both sides. Make adjustments with the engine off and the ignition key removed.
If the steering feels loose, check the steering components for wear or damage. Inspect the tie rods, steering gears, and bushings. Tighten any loose hardware and replace worn or damaged parts. Regularly lubricate the steering mechanism as part of routine maintenance. If the issue persists, consult a professional technician.