Simplicity 1693967 Broadmoor Parts Manual

To start the Simplicity 1693967 Broadmoor Tractor, ensure the parking brake is engaged, the PTO is disengaged, and the throttle is set to the mid-level position. Turn the ignition key to the 'Start' position until the engine starts, and then release the key.
Use SAE 30 oil for temperatures above 40°F (4°C) and SAE 5W-30 for temperatures below 40°F (4°C). Always refer to the operator's manual for specific oil recommendations.
Check the battery connections for tightness and corrosion. Ensure the fuel tank is filled and the fuel valve is open. Verify the spark plug is clean and properly connected. If the problem persists, consult the manual or a professional technician.
The recommended tire pressure for the front tires is 14 psi and for the rear tires is 10 psi. Always check the tire pressures before each use for optimal performance.
The air filter should be inspected before each use and replaced every 100 hours of operation or annually, whichever comes first. Operating in dusty conditions may require more frequent changes.
Ensure the PTO switch is engaged and the drive belt is not damaged or off the pulleys. Inspect the PTO clutch and wiring for any issues. If the problem persists, seek assistance from a certified technician.
To level the mower deck, park the tractor on a flat surface. Measure the height of the blades from the ground on each side. Adjust the deck links until both sides are equal. Refer to the manual for detailed instructions.
Regular maintenance includes checking the oil level, inspecting the air filter, examining the spark plug, lubricating pivot points, and checking tire pressure. A full maintenance schedule can be found in the operator's manual.
For off-season storage, clean the tractor thoroughly, change the oil, and add a fuel stabilizer to the tank. Remove the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
Excessive vibration may be caused by unbalanced blades or damaged belts. Inspect the mower blades for balance and sharpness, and check the belts for wear or damage. Replace any faulty components as needed.