Simplicity 1693966 Broadmoor Parts Manual
![Simplicity 1693966 Broadmoor Tractor manual cover](/images/wrYcQNjXyeQNYOXISvGIEmCf/thumbs/thumb175x175.webp)
To change the oil, warm up the engine, turn it off, and remove the oil drain cap. Drain the old oil into a pan, replace the drain cap, and refill with new oil as specified in the owner's manual.
Ensure the tractor is on a level surface. Adjust the mower deck height by using the height adjustment lever located near the driver's seat, setting it to the desired position.
Check the battery connections for corrosion and ensure they are tight. Verify the fuel level and ensure the fuel valve is open. If the problem persists, inspect the spark plug and replace if necessary.
Regular maintenance includes changing the oil and filter, checking the air filter, sharpening the blades, inspecting belts, and checking tire pressure. Refer to the manual for detailed intervals.
Safely secure the tractor, remove the mower deck, and use a wrench to loosen the blade bolts. Replace the old blades with new ones, ensuring they are aligned correctly, and reattach the deck.
Check the transmission fluid level and top it up if necessary. Inspect the drive belt for wear or damage and replace it if needed. Consult the manual for further troubleshooting steps.
Ensure blades are sharp and balanced, the deck is clean from debris, and the tire pressure is correct. Regularly check for bent or damaged parts and adjust the deck level as needed.
Clean the exterior and mower deck, change the oil, add a fuel stabilizer to the fuel tank, and store the tractor in a dry place. Disconnect the battery to prevent drainage.
Use a tire pressure gauge to check each tire's pressure. Inflate the tires to the manufacturer's recommended PSI, which can be found in the owner's manual or on the tire sidewall.
Uneven cutting can be caused by unbalanced blades, incorrect tire pressure, or an improperly leveled deck. Inspect these areas and make necessary adjustments to ensure an even cut.