Simplicity 1693817 Broadmoor Parts Manual

To start the Simplicity 1693817 Broadmoor Tractor, ensure that the parking brake is engaged, the PTO switch is off, and the transmission is in neutral. Insert the ignition key and turn it clockwise to the 'Start' position until the engine starts, then release it to the 'Run' position.
Use clean, fresh unleaded gasoline with an octane rating of at least 87. Avoid using gasoline with more than 10% ethanol to prevent engine damage.
Change the oil after the first 5 hours of operation, and then every 25 hours or at the start of each mowing season, whichever comes first.
The recommended tire pressure is 10 psi for the front tires and 8 psi for the rear tires. Check the pressure regularly to ensure optimal performance.
If the engine does not start, check the battery charge, ensure that the spark plug is clean and properly connected, and verify that the fuel tank has fresh gasoline. Also, make sure that all safety switches are engaged.
Check to ensure the PTO switch is functioning properly, and inspect the drive belts for wear or damage. Replace any faulty components as needed.
To adjust the cutting height, use the height adjustment lever located near the driver's seat. Move the lever to the desired cutting height position, which ranges from 1 to 4 inches.
At the end of the mowing season, clean the tractor thoroughly, change the oil, sharpen the blades, check and charge the battery, and store the tractor in a dry, sheltered place.
To replace the air filter, first remove the air filter cover, take out the old filter, and insert a new one. Make sure the filter is seated properly before replacing the cover.
Excessive vibration could be caused by unbalanced blades or loose components. Check the blades for balance and sharpen if necessary. Ensure all bolts and components are tightened securely.