Simplicity 1693810 Landlord DLX Parts Manual
![Simplicity 1693810 Landlord DLX Tractor manual cover](/images/GDNFxSennoaFOIXCUwKfhbEC/thumbs/thumb175x175.webp)
To perform routine maintenance, regularly check the engine oil level, replace the air filter, inspect the spark plug, and lubricate all moving parts. Refer to the user manual for specific intervals and procedures.
Ensure the battery is charged, check the fuel level, inspect the spark plug for wear, and verify that the safety switches are engaged. If the problem persists, consult the troubleshooting section of the manual.
Warm up the engine, then turn it off. Remove the oil drain plug and drain the old oil. Replace the drain plug and fill with new oil according to the specifications in the manual. Dispose of the old oil safely.
Use clean, fresh unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content.
To adjust the mowing deck, park the tractor on a level surface, disengage the blades, and lower the deck to the desired height using the adjustment lever. Make sure the deck is level from side to side.
Check the PTO (Power Take-Off) switch for proper operation, inspect the drive belt for wear or damage, and verify that all safety interlocks are functioning. Replace any faulty components as needed.
Clean the tractor thoroughly, change the oil, stabilize the fuel, and store the tractor in a dry, protected area. Disconnect the battery and inflate the tires to the recommended pressure.
Check the tire pressure, ensure the mowing deck is level, and inspect the blades for sharpness and damage. Replace or sharpen the blades as necessary.
The recommended tire pressure can vary, so consult the user manual for specific values. Generally, it is around 10-14 PSI for the front tires and 8-10 PSI for the rear tires.
Refer to the user manual for the specific steps. Generally, it involves removing the mower deck, releasing the belt tension, and replacing the old belt with a new one. Ensure the new belt is properly aligned in the pulleys.