Simplicity 1693801 Regent Parts Manual
![Simplicity 1693801 Regent Tractor manual cover](/images/BzKwZOlVJjKMaNTOWmzdyswb/thumbs/thumb175x175.webp)
To change the oil, park the tractor on a level surface and turn off the engine. Allow the engine to cool, then locate the oil drain plug underneath the tractor. Place an oil pan beneath it, remove the plug, and allow the old oil to drain completely. Replace the drain plug, remove the oil filter, and install a new one. Finally, fill the engine with the recommended oil type and capacity as per the manual.
If the tractor won't start, check the battery connections to ensure they are clean and tight. Verify that the battery is charged. Inspect the spark plug for wear or damage and replace if necessary. Ensure the fuel tank is filled with fresh fuel. Check the fuel filter for clogs and replace if needed.
Blades should be sharpened every 25 hours of use or whenever you notice a decrease in cutting performance. Remove the blades using the appropriate tools, sharpen them with a grinder or file, and ensure they are balanced before reinstalling.
The Simplicity 1693801 Regent Tractor is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using gasoline with more than 10% ethanol.
Uneven cutting can be caused by a misaligned deck, worn blades, or low tire pressure. Check that the mower deck is level and adjust accordingly. Inspect the blades for wear and sharpen or replace them if necessary. Ensure all tires are inflated to the recommended pressure.
To store the tractor, clean it thoroughly to remove grass and debris. Change the oil and replace the oil filter. Add a fuel stabilizer to the gas tank and run the engine for a few minutes to circulate it. Disconnect the battery and store it in a cool, dry place. Cover the tractor to protect it from dust and moisture.
To adjust the mower deck height, locate the deck lift lever on the tractor. Move the lever to the desired cutting position. For finer adjustments, refer to the manual to access the leveling adjusters on the deck and make necessary changes.
To improve traction, ensure that the tires are properly inflated. You might also consider using tire chains or adding wheel weights for better traction. Reducing speed and avoiding sharp turns can also help maintain control on wet surfaces.
Inspect the air filter every 25 hours of operation or more frequently if operating in dusty conditions. Clean the filter by tapping it gently to remove debris or replace it if it's excessively dirty or damaged. Ensure the air filter cover is securely fastened after servicing.
Yes, the Simplicity Regent Tractor can tow attachments. However, ensure the combined weight of the towed load and attachments does not exceed the manufacturer's recommendations. Always attach accessories properly and adhere to safety guidelines while operating.