Simplicity 1693703 Broadmoor Parts Manual
![Simplicity 1693703 Broadmoor Tractor manual cover](/images/EmzvrOlHJYJeudGzknHKQfpF/thumbs/thumb175x175.webp)
To change the oil, locate the oil drain valve, place a suitable container underneath, and open the valve to drain old oil. Replace the oil filter and refill with the recommended oil type and quantity.
Check the battery connections and charge if necessary. Ensure the fuel valve is open and there is sufficient fuel. Inspect the spark plug for wear or damage and replace if needed.
Regularly sharpen the mower blades and clean the underside of the mower deck. Ensure the tires are inflated to the correct pressure for even cutting.
The recommended tire pressure can usually be found in the owner's manual or on the tire sidewall. It's typically around 10-14 psi for front tires and 8-12 psi for rear tires.
Regular maintenance should be performed every 25 hours of operation or at the beginning of each mowing season. This includes checking fluids, belts, blades, and tires.
Excessive vibration can be caused by unbalanced blades or debris caught in the mower deck. Check and balance the blades and clear any debris from the deck.
To replace the drive belt, first disengage the mower deck and remove it according to the manual. Release the belt tension and remove the old belt, then install the new belt and reassemble.
Use unleaded gasoline with an octane rating of at least 87. Avoid using ethanol blends higher than E10, as they can damage the engine.
Check the PTO clutch for functionality and inspect the engagement cable for any damage or disconnection. Ensure the deck is properly attached and the belt is intact.
Ensure the engine cooling fins are clean and free of debris. Check the coolant levels if applicable, and ensure there is proper airflow around the engine.