Simplicity 1693525 Express Parts Manual
![Simplicity 1693525 Express Tractor manual cover](/images/zMHNCtEbNbKdnERKJFFEfYCH/thumbs/thumb175x175.webp)
Ensure the parking brake is engaged, place the throttle in the choke position, turn the ignition key to the start position, and release it once the engine begins to run.
Verify that there is sufficient fuel, check the battery charge, ensure the spark plug is clean and functional, and inspect the fuel filter for clogs.
Change the oil after the first 5 hours of operation, then every 50 hours or annually, whichever comes first.
Use SAE 30 oil for temperatures above 32°F (0°C) and SAE 5W-30 or 10W-30 for temperatures below 32°F (0°C).
Ensure the mower deck is level, check tire pressure, and inspect the blades for sharpness and balance.
Keep the battery terminals clean, check the water level regularly, and ensure it is fully charged before storage.
Check the transmission fluid level, inspect the drive belt for wear, and ensure the transmission linkage is correctly adjusted.
Disconnect the spark plug, remove the mower deck, release the belt tension, remove the old belt, and install the new belt following the belt routing diagram.
Clean the tractor thoroughly, change the oil, add fuel stabilizer, remove the battery, and store it in a dry, cool place.
Use the cutting height adjustment lever located near the driver's seat to set the desired grass height.